My Clients' Tune-Ups consists of 9 SR files.
I have noticed that 3 'Repair Tool' reports are being generated in HTML format per client.
Is there a setting that I am missing that would generate just 1 Repair Tool report instead of 3?
One report would be easier for me to work with, etc.
Thank you in advance.
Multiple Repair Tool Reports
Forum rules
We have no special rules for UVK forums. Just try to be polite and clear in your posts.
Please don't post spam in this forum. Spammers will be banned by IP, e-mail and username.
We reserve the right to delete all posts and ban all users we consider not having respected these rules without warning.
We have no special rules for UVK forums. Just try to be polite and clear in your posts.
Please don't post spam in this forum. Spammers will be banned by IP, e-mail and username.
We reserve the right to delete all posts and ban all users we consider not having respected these rules without warning.
Multiple Repair Tool Reports
Allan C.
Re: Multiple Repair Tool Reports
Allan, UVK generates one report per repair operation. Each repair operation lasts until you leave the System repair section or close the application. Are you leaving the section prior to finishing the operation?
One thing we humans have in common is that we are all different. So, if you think you're weird because you're different from everyone else, then we are all weird.
Fred
Fred
Re: Multiple Repair Tool Reports
Yes, there could be other sections of UVK that I use interspersed with SR Files.
Allan C.
Re: Multiple Repair Tool Reports
If you want only one HTML report, do not leave the System repair section before all the repair operation is complete. If you need to use the other sections of the application, launch a separate instance by double-clicking UVK's desktop shortcut.
Also ensure all the SR files you load during the repair operation were saved with the Create professional report option checked. Otherwise the current report is closed when that option is unchecked.
Also ensure all the SR files you load during the repair operation were saved with the Create professional report option checked. Otherwise the current report is closed when that option is unchecked.
One thing we humans have in common is that we are all different. So, if you think you're weird because you're different from everyone else, then we are all weird.
Fred
Fred
Re: Multiple Repair Tool Reports
I understand and will try to remember.Fred wrote: ↑Thu Feb 16, 2017 6:55 pm If you want only one HTML report, do not leave the System repair section before all the repair operation is complete. If you need to use the other sections of the application, launch a separate instance by double-clicking UVK's desktop shortcut.
Also ensure all the SR files you load during the repair operation were saved with the Create professional report option checked. Otherwise the current report is closed when that option is unchecked.
What happens when UVK restarts the computer (in terms of this report)?
Also, the additional reports (after the first) are not added to the zip automatically.
Allan C.
Re: Multiple Repair Tool Reports
Normally the same report is resumed after reboot. A least that's what took me a few hours to code.
One thing we humans have in common is that we are all different. So, if you think you're weird because you're different from everyone else, then we are all weird.
Fred
Fred