Found a bug in system info :
Here's the list of my harddisks in UVK system info :
[Fixed, removable and optical drives]
Hard disk 0=SanDisk ExtremePro USB Device Partitions: 1 Size: 465 GB
Hard disk 0 info=Serial: 00c0b85be Failure predicted: NO Work hours count: 6959
Hard disk 1=Samsung SSD 850 EVO 500GB Partitions: 4 Size: 1.81 TB
Hard disk 1 info=Serial: S21JNSAG184729R Failure predicted: NO Work hours count: 6944
Hard disk 2=WD Elements 1042 USB Device Partitions: 1 Size: 1.81 TB
Hard disk 2 info=Serial: WXK1E72AAUL2 Failure predicted: NO Work hours count: 6943
Hard disk 3=ST2000DM001-1ER164 Partitions: 2 Size: 931 GB
Hard disk 3 info=Serial: S4Z0HHBG Status: OK
Hard disk 4=ST2000DM001-1ER164 Partitions: 2 Size: 119 GB
Hard disk 4 info=Serial: S4Z0HJ59 Status: OK
Système (C:)=4.67 GB free of 418 GB. File system: NTFS Type: Hard disk volume
Données (D:)=1.39 TB free of 3.63 TB. File system: NTFS Type: Hard disk volume
Movies (F:)=15.2 GB free of 931 GB. File system: NTFS Type: Hard disk volume
Declic_AIO_128 (H:)=55.7 GB free of 119 GB. File system: NTFS Type: Removable media
Optical drive (G:)=Name: TSSTcorp CDDVDW SH-S203P Type: DVD Writer
All is messed up :
- the name of hard disk 0 should be Samsung SSD 850 EVO (actually hard disk 1) with 4 partitions, serial S21JNSAG184729R and the size and work hours are ok
- the name of hard disk 1 should be ST2000DM001-1ER164 (actually hard disk 3) with 1 partition, serial S4Z0HJ59 (actual disk 4) and the size and work hours are ok
- the name of hard disk 2 should be ST2000DM001-1ER164 (actually hard disk 4) with 1 partition, serial S4Z0HHBG (actual disk 3) and the size and work hours are ok
- the name of hard disk 3 should be WD Elements 1042 USB Device (hard disk 2) with the serial WXK1E72AAUL2 (hard disk 2), the size is ok, but there's only one partition, not two
- hard disk 4 should be SanDisk ExtremePro USB Device with serial 00c0b85be (hard disk 0) with only 1 partition, not two, and the size is ok