1) Set your PC to boot from DVD via BIOS
2) Put the DVD in and let it load until you get to this screen: Screen to select language
3) Once at this screen, press: (SHIFT+F10) to get a CMD window
4) MAKE SURE YOU SELECT THE DRIVE YOUR INSTALLING WINDOWS TO NOT ANOTHER. In the CMD window
Type in Each Command and Press <ENTER> Key as follows:
5) DiskPart <ENTER>
6) list disk <ENTER>
7) select disk 0 <ENTER>
8) clean <ENTER>
9) create partition primary align=1024 <ENTER>
10) format fs=ntfs <ENTER> (Will Take a While)
11) assign <ENTER>
12) active <ENTER>
13) exit <ENTER>
14) exit <ENTER>
After it completes, exit the INSTALL COMPLETELY and reboot.
Once you are back in, go about installing Windows just DO NOT ALLOW Windows to create a new partition, use the only one there.
Windows will now install
This info was taken from here: Give credit to them, not me.
http://www.sevenforums.com/installation ... ition.html
Windows 7: Setup was unable to create a new system partition
Forum rules
We have no special rules for UVK forums. Just try to be polite and clear in your posts.
Please don't post spam in this forum. Spammers will be banned by IP, e-mail and username.
We reserve the right to delete all posts and ban all users we consider not having respected these rules without warning.
We have no special rules for UVK forums. Just try to be polite and clear in your posts.
Please don't post spam in this forum. Spammers will be banned by IP, e-mail and username.
We reserve the right to delete all posts and ban all users we consider not having respected these rules without warning.
-
- Posts: 1529
- Joined: Sun May 25, 2014 7:44 am
- Location: Missouri
Windows 7: Setup was unable to create a new system partition
Jim
It is not "Can it be done?" but rather, "How can we do it?"
It is not "Can it be done?" but rather, "How can we do it?"
Re: Windows 7: Setup was unable to create a new system partition
Thanks Jim. Good information. I sort of had this issue with an HP laptop that wouldn’t accept the recovery disks HP sent to me. It kept erroring out. The directions they sent on how to use the disks didn’t mention anything about it, but I had to clean the disk using DiskPart before it would work.
Play stupid games….win stupid prizes
-
- Posts: 2
- Joined: Thu Jun 20, 2019 5:23 pm
Re: Windows 7: Setup was unable to create a new system partition
Thank you Charger440