Windows 7: Setup was unable to create a new system partition
Posted: Mon May 09, 2016 5:30 pm
1) Set your PC to boot from DVD via BIOS
2) Put the DVD in and let it load until you get to this screen: Screen to select language
3) Once at this screen, press: (SHIFT+F10) to get a CMD window
4) MAKE SURE YOU SELECT THE DRIVE YOUR INSTALLING WINDOWS TO NOT ANOTHER. In the CMD window
Type in Each Command and Press <ENTER> Key as follows:
5) DiskPart <ENTER>
6) list disk <ENTER>
7) select disk 0 <ENTER>
8) clean <ENTER>
9) create partition primary align=1024 <ENTER>
10) format fs=ntfs <ENTER> (Will Take a While)
11) assign <ENTER>
12) active <ENTER>
13) exit <ENTER>
14) exit <ENTER>
After it completes, exit the INSTALL COMPLETELY and reboot.
Once you are back in, go about installing Windows just DO NOT ALLOW Windows to create a new partition, use the only one there.
Windows will now install
This info was taken from here: Give credit to them, not me.
http://www.sevenforums.com/installation ... ition.html
2) Put the DVD in and let it load until you get to this screen: Screen to select language
3) Once at this screen, press: (SHIFT+F10) to get a CMD window
4) MAKE SURE YOU SELECT THE DRIVE YOUR INSTALLING WINDOWS TO NOT ANOTHER. In the CMD window
Type in Each Command and Press <ENTER> Key as follows:
5) DiskPart <ENTER>
6) list disk <ENTER>
7) select disk 0 <ENTER>
8) clean <ENTER>
9) create partition primary align=1024 <ENTER>
10) format fs=ntfs <ENTER> (Will Take a While)
11) assign <ENTER>
12) active <ENTER>
13) exit <ENTER>
14) exit <ENTER>
After it completes, exit the INSTALL COMPLETELY and reboot.
Once you are back in, go about installing Windows just DO NOT ALLOW Windows to create a new partition, use the only one there.
Windows will now install
This info was taken from here: Give credit to them, not me.
http://www.sevenforums.com/installation ... ition.html